Nansulate® Cool Ride Technology for Motorcycles, ATV, Scooters, and MotorBike Exhausts

Warranty Void if used on pipes that reach higher than 400F

ONLY $39.95 /quart

Nansulate® Cool Ride Technology
Put the Frost on Your Exhaust

Our newly patented Cool Ride Technology is a one-of-a-kind protective coating that can be easily applied to motorized vehicles of any kind to reduce the surface temperature of exhaust pipes and lower the risk associated with skin contact. Whether you're protecting yourself, your passengers, or safe guarding your child's new motorized vehicle, you can be sure that Nansulate® Cool Ride will drastically improve the safety of your bike, and reduce the likelihood of a serious burn. Use it on the back end exhaust pipe, or on the forward feeding lines to make sure to avoid an unwanted accident that could result in a bad burn, trip to the emergency room, or even worse, long lasting scars and plastic surgery. Through our Cool Ride brand, we are committed to providing a quality product that will make a difference in the lives of people everywhere. Engineered at the Nano-Scale, our patented formula is a safe, easy-to-apply insulation that can be used to prevent the next serious exhaust burn accident.

Order by Phone

Facts & Information
Burn Rubber not Your Body

The majority (70%) of exhaust burn victims are on average younger than 25.
Burns from motorized vehicles are two times higher for children than for adults.
Most (52%) of burns occur in late spring/early summer during peak riding seasons.
Just as many passengers are burned as riders.
The majority (69%) of passenger burns are female.
Many burns happen while motorized vehicle is not in motion.
Mostly burns effect the hands or the right leg below the knee.
Most burns are at least 2nd degree.
Some burns are 3rd degree and require surgery.
Some of these burns will require plastic surgery.
Severe burns scar and will never fully disappear.
Burns often cause infections which can require hospitalization.
It can take several weeks to months for a severe burn to heal.
Severe burns will on average cost 3.5 hospital visits.
A google search on "Motorcycle Burns" returns 12,800,000 results.
Nansulate® Cool Ride can drastically reduce the risk of burn.
There is no other product on the market like Nansulate® Cool Ride. **

How it Works
The Science Behind Safe

Nansulate® Cool Ride is engineered at the nano-scale to specifically insulate metals (and other materials including plastic) extremely well. The coating reduces heat conduction, acting as a barrier against heat, and is also extremely hydrophobic (water resistant) to provide extra benefits such as rust protect in addition to heat insulation. There is no other product on the market that can do what Cool Ride Technology will.

Easy Application

Our water-based nano formula easily applies onto exhaust pipes using a typical paint sprayer, roller, brush, or applicator. The bike must be turned off and the exhaust pipes cooled to room temperature before application process begins. Once bike is off and cooled, lightly apply the Cool Ride solution over the area of pipe selected for cooling, thoroughly covering the area. Once covered with a coat, let it cure in a dry environment without turning the motor on at any point until finished. Repeating this process multiple times will give you the most benefit of an extremely cool exhaust. Review the application instructions for full details on recommended coverage (number of coats) and application method.

How Much Will It Reduce the Temperature?

You can use a certain number of coats to reach a desired temperature drop. The application can be tailored to your equipment needs. For example, a 350F surface can be reduced to a 140F (OSHA safe touch level) - a 60% reduction; And a 250F surface can be reduced to the same 140F temperature with the recommended application - a 44% reduction. Review our Temperature Gradient Chart to see how many coats to use.

How Long Will Nansulate® Cool Ride Last?

Product lasts between 5-10 years, depending upon wear and environment.

Media Coverage Click Here for our Official Press Release

Specifications
Cool Ride Technology Rules

Nansulate® Cool Ride will work on any surfaces that reach a maximum of 400℉ (204℃). The temperature extremes to which the material can be applied are 40℉ to 210℉ (4℃ to 99℃). It is recommended that each coat be allowed to dry for 1-2 hours before applying an additional coat; the surface should be dry to touch and non-tacky. If a surface is brought above 212F (100C) too soon after application and before the product is allowed to cure, blistering may occur. Always use this product in accordance with the specifications for most effective results. **

It Will Work on Virtually Anything

You'll be able to use this product on virtually any motorized vehicle you have with exhaust pipes. We've developed Cool Ride with Motocross, ATV, Sport, Mobile Transport Motorcycles, Scooters, and Kids Mini and Pee Wee bikes in mind.

Donate to Charity
Make a Difference to a Child

There are over 280,000 children who are burned each year in United States alone. Your purchase of Nansulate® Cool Ride can go towards helping these children have better lives. When purchasing, make sure to look for the check box next to Donate, and together we can help fund recovery and rehabilitation for children who have become victim to severe life-altering burns.

Click Here for more information

Only $39.95 / quart

Our company provides energy saving and protective solutions to the industrial, residential, and commercial sectors with a patented, clear coating technology. Our goal is to use the science of nanotechnology to explore opportunities and create products which make a difference in our daily lives by increasing energy efficiency, protecting people and infrastructure, and lowering costs for heating and cooling. Our patented, award-winning coatings have been providing nanotechnology based solutions since 2004. While Nansulate® Cool Ride may be our newest product, it is built upon technology that has been in use world-wide for over seven years. More at Nansulate.com

Free Shipping applies only to ground shipping within the continential United States.

*This information applies to reducing surface temperature to the U.S. Occupational Safety and Health Administration (OSHA) safe touch standard of 140F (60C). When applied, cured, and used as directed with the appropriate thickness/number of coats to reduce the surface temperature, not exceeding 400F/204C, to a safe touch level per OSHA standards of 140F (60C). Information is deemed to be accurate however is not guaranteed. No warranty, express or implied is given regarding the accuracy of this information. Each application is unique and findings may be different due to environmental conditions. Surfaces should always be measured with a surface contact thermometer to determine safe touch level prior to riding.

**Sources:
U.S. National Library of Medicine National Institutes of Health,
Case studies in contact burns caused by exhaust pipes of motorcycles. http://www.ncbi.nlm.nih.gov/pubmed/12052376
Burn injuries related to motorcycle exhaust pipes: a study in Greece. http://www.ncbi.nlm.nih.gov/pubmed/15774297
Exhaust burns in children. http://www.ncbi.nlm.nih.gov/pubmed/20965663